What are the advantages of XB controller pin reducer

Publish Time: 2021-11-16     Origin: WGT

1. XB controller pin gear planetary reducer has stable operation and low noise DB: During operation, there are many tooth pairs directly contacting the surface, high coincidence rate, stable operation, strong overload protection ability, low mechanical vibration and low noise Specifications and model noise of the model.
2. The cycloid reducer has a large transmission ratio and high efficiency: the transmission ratio of the primary gear is 9~87, the transmission ratio of the double gear is 121~5133, and the multi-stage combination reaches thousands.In addition, the pin-tooth meshing system has sleeve rolling friction, and the meshing surface layer has no relative sliding, so the movement efficiency of the primary deceleration reaches 94%.
3. The application is safe, reliable and durable: because the key parts are quenched (HRC58-62) and finely ground by high-carbon alloy steel, and the wired teeth are meshed with pin gear sleeves and transmitted to the pin teeth to form a rolling friction pair, friction The coefficient is small, so there is no relative sliding in the meshing area, and the wear is very small, so it is strong and durable.
4. Compact structure and light weight: Compared with other reducers with the same output power, the net weight volume is less than 1/3, because it is planetary gear transmission, and the input shaft and output shaft are on the same shaft to obtain the smallest possible Specifications.

FEEDBACK

What are the common causes of failure of NGW102-6 planetary reducer bearing components?

What are the repair methods after the NGW81-25 planetary reducer bearing assembly fails?

How to judge whether there is a problem with the internal transmission pair of WP series reducer

What may be the causes of load fluctuations of WP series worm gear reducer?

Test the load before reducing the reducer Selection: on-site collection method of current, speed and load spectrum - Hangzhou Weigao Transmission