What about the controller pin reducer?
Publish Time: 2021-10-27 Origin: 威戈传播
How about the Vanova wheeled reducer?Come on, take a look at the editor.The main reduction rate of the control screw gear reducer has reached 94%.The reduction will be even greater if multi-stage transmission is employed.Also, its size is relatively small, its structure is compact, its volume is relatively small and easy to handle.It has a large number of meshing teeth, large overlap coefficient, strong balance ability, and strong overload capacity, so the vibration amplitude and noise level of the fuselage are relatively small during the working process, which well ensures the level of the working environment.In addition, its material is reliable bearing steel, which has a long service life, and some transmission contacts adopt rolling friction, which prolongs the service life of the machine.
1. High-speed ratio and high-efficiency single-stage transmission can achieve a reduction ratio of 1:87, and the efficiency exceeds 90%.If multi-stage transmission is adopted, the reduction ratio is even greater;
2. Compact structure and small volume.Due to the principle of planetary transmission, the input shaft and output shaft are on the same axis, so the model can obtain the smallest possible size;
3. Stable operation, low noise, cycloid needle teeth with a large number of meshing teeth, large overlap coefficient and balanced mechanism mechanism, so that vibration and noise are limited to a small extent;
4. Reliable use and long service life.Since the main parts are made of high-carbon chromium steel, high strength (HRC58~62) is obtained after quenching treatment, rolling friction is used for some transmissive contacts, so they are durable and have a long service life.
5. With reasonable design, easy maintenance, easy disassembly and installation, 100% less parts and simple lubrication, the swing load pin gear reducer is deeply trusted by users.