What about the burning reducer?

In daily use, due to improper operation or carelessness, the reducer circuit will be abnormal and burned.What aspects should we pay attention to.

1. The three-phase voltage is unstable.Voltage instability includes different three-phase voltages, three-phase power loss, and low voltage.

2. Repeated operation, repeated operation is the most harmful to the reducer.The current is very large when the reducer is switched on and off.Long-term repeated operation is the biggest cause of burnout of the reducer.

3. Long-term overload and incorrect power selection will cause the machine itself to heat up, and the reducer will burn out after a long time.

4. Water entering the motor is also very harmful.If the motor is energized after being flooded, an internal short circuit will occur and the reducer will be burned.

5. During the operation of the machine, if the transmission is blocked, the reducer will generate a lot of heat, which will burn the machine.

During the operation of the reducer, if there are long-term overloads, water ingress in the motor, etc., if you do not pay attention to the cleaning of the hips, it is easy to cause the reducer to burn out.This will not only cause financial loss, but also affect our work efficiency.Therefore, we must pay attention to the above points during use.