Treatment of oil leakage of planetary reducer

Oil leakage of planetary reducer is a common problem. If things go on like this, it will increase the cost of the enterprise, cause equipment damage, and easily cause some production accidents.Therefore, it is also very important to reduce the leakage of the planetary reducer.What are the treatment methods for oil leakage of planetary reducer?Listen to the introduction of the Great Wall:

Planetary reducer

1. Surface treatment

Extend the oil leak 1cm to both sides, use a polishing machine to make the original color of the metal, and clean it with alcohol or acetone.

2. Concord materials

Mix in proportion and stir until there is no color difference.

3. Application materials

This is the most common method.First, repair with repair materials.After confirming that there is no leakage, cover the rubber polymer repair protection material.

4. Curing

8 hours/24°C (material temperature).Humidification at room temperature can accelerate the curing of the material.

The maintenance operation of the planetary reducer is related to the development of the enterprise.Leakage not only wastes resources, but also increases maintenance intensity.Therefore, Jin Changcheng reminds everyone that relevant measures must be taken to reduce the leakage and vibration of the planetary reducer, improve the operating efficiency, and reduce the maintenance and operating costs of the enterprise.

m32 gearbox, 6-speed automatic gearbox, semi-automatic gearbox, worm gear motor, power steering gearbox,