Structural characteristics of planetary cycloid reducer and causes of overheating

Publish Time: 2021-11-16     Origin: WGT

It has compact structure, return clearance, high precision, long service life and high rated output torque.But the price is slightly expensive.The gear reducer has the characteristics of small volume and large transmission torque.The gear reducer is designed and manufactured according to the modular combination system.There are many motor combinations, installation forms and structural schemes.Transmission ratios are carefully graded to meet different service conditions and enable mechatronics.The gear reducer has high transmission efficiency, low energy consumption and excellent performance.The controller pin gear reducer is a transmission model based on the principle of a controlled pin tooth meshing planetary transmission.It is an ideal transmission device.It has many advantages, has a wide range of uses, and can run forward and backward.
Planetary garland pin gear reducer is one of the main products of our company.Its good product quality and after-sales service have been highly praised by all walks of life in the industry.Our company has advanced production technology, excellent casting and processing equipment.Through exquisite technical strength, the planetary cycloid pin reducer produced by our company is favored by users with reliable quality and reasonable price.
The following are the reasons for the high temperature of the planetary controller pin gear reducer:
Add an appropriate amount of lubricating oil before using the reducing agent.In the case of heating, it is preferable to check for lack of lubricating oil.If there is no oil and lack of oil, it is necessary to check whether the reducer is too small, the tension is too large, and the overload will also cause the reducer to heat up.

FEEDBACK

What are the common causes of failure of NGW102-6 planetary reducer bearing components?

What are the repair methods after the NGW81-25 planetary reducer bearing assembly fails?

How to judge whether there is a problem with the internal transmission pair of WP series reducer

What may be the causes of load fluctuations of WP series worm gear reducer?

Test the load before reducing the reducer Selection: on-site collection method of current, speed and load spectrum - Hangzhou Weigao Transmission