Output speed of reducer

Whenever it is necessary to control the speed of the equipment, the help of the reducer is needed, because the equipment can realize the function of controlling the speed.The following is an introduction about its output speed.By knowing the output speed, the efficiency can be improved.

1. The output speed of the reducer is the input speed of the equipment.

2. The transmission ratio refers to the ratio of the speed of the motor to the speed of the equipment.AC four-pole motor, 1440 revolutions per minute, reduction ratio of 1:10, and its output speed is 144 revolutions per minute.

3. If the rated load, the output speed is less than the theoretical value.

4. If used alone, the transmission ratio is: the transmission ratio of the internal gear of the reducer.In a gear reducer, the product of all the teeth of the large gears divided by the product of the teeth of all the small gears is the ratio.

5. If the motor and reducer are integrated together, such as a miniature geared motor, the output of the motor is toothed and meshed with the gear on the reducer, then the reduction ratio is: the product of the number of teeth.The product of all driven gears divided by the number of teeth of all driving gears is the speed ratio.

By knowing the output speed of the reducer, we can use it to control the speed of the equipment more effectively.We can use what we have learned to make the most of it and improve efficiency, which is a very important role.