Operation and maintenance elements of gear reducer

Publish Time: 2021-09-27     Origin: 威高传动

When using a gear reducer, we need to do some preparations.Let's talk about the key points and preparation points in these operations.
1. Before the gear reduction device is used, the shaft assembly needs to be cleaned to check whether the shaft assembly has collisions, pollutants and how to clean it.
2. The working temperature of the gear reducer is about 0 to 40 degrees.
3. Check whether the matching size of the connecting hole of the gear reduction device is appropriate, and the clearance of the small hole is about H7.
4. When using the gear reducer, the exhaust screw device should be inserted when the position is better to ensure the gas discharge of the gear reducer device.
Gear reducer assembly
Whether the reducer is flat, decompressed, button structure, etc. during assembly.
Under random conditions, the outer wheel of the hammer, including couplings, gears and other outputs, will not be damaged.
Maintenance and application of gear reducer
When repairing and assembling the gear reducer, it is necessary to check whether its operation is dexterous and convenient.When using it, you need to try it when you are free, and slowly increase the bearing capacity during operation.
Gear reducers must not exceed limit load applications.

FEEDBACK

What are the common causes of failure of NGW102-6 planetary reducer bearing components?

What are the repair methods after the NGW81-25 planetary reducer bearing assembly fails?

How to judge whether there is a problem with the internal transmission pair of WP series reducer

What may be the causes of load fluctuations of WP series worm gear reducer?

Test the load before reducing the reducer Selection: on-site collection method of current, speed and load spectrum - Hangzhou Weigao Transmission