Main points of maintenance process of worm gear reducer

Publish Time: 2021-09-29     Origin: 威高传动

Machine maintenance measures are normal and necessary.Maintenance is not only the guarantee of the vitality of machine parts, but also the guarantee of its efficient operation.This is true of any machine, and the worm gear reducer is no exception.Let's take a look at what needs to be paid attention to in the maintenance of the worm gear reducer.
1. The worm gear reducer is mostly used for all-weather uninterrupted work, with strong durability, and there is no problem with forward and reverse operation.
2. The direction of the output shaft and the input shaft of the worm gear reducer are relatively opposite, and the rotation direction of the output shaft and the input shaft is the same.
3. The worm gear reducer has no self-locking ability.
4. The worm gear reducer may be overloaded, so for the safety of the machine and personnel, protective measures must be installed.
5. There is no vibration when the worm gear reducer is assembled.In hard conditions, the shaft of the worm gear reducer should not be inclined more than 15 degrees where it is inclined.
6. When the flange type worm gear reducer is assembled, the output is vertically downward.
7. Whether the worm gear reducer is assembled vertically or horizontally, lubrication means are required to ensure the lubrication effect of the worm gear reducer.
8. When the worm gear reducer is used for lubrication, the assembly angle is relatively free.

FEEDBACK

What are the common causes of failure of NGW102-6 planetary reducer bearing components?

What are the repair methods after the NGW81-25 planetary reducer bearing assembly fails?

How to judge whether there is a problem with the internal transmission pair of WP series reducer

What may be the causes of load fluctuations of WP series worm gear reducer?

Test the load before reducing the reducer Selection: on-site collection method of current, speed and load spectrum - Hangzhou Weigao Transmission