Introduction and installation points of worm gear screw jack

Publish Time: 2019-11-09     Origin: Site

The worm gear screw jack is a very basic component, which has the advantages of compact structure, small size, light weight, high power and low noise.


The worm gear screw lift is more flexible to use, has many supporting facilities, is reliable, has a long service life, and effectively reduces costs.Worm screw lifts can be used alone or in combination with other lifts.It can be driven by electric motor or other power, and it can also be driven manually, which is easy to understand and easy to operate.


When installing, you must strictly abide by the requirements of the instructions for use to obtain a better performance environment, and at the same time make the worm gear screw lifter work more efficiently, so that the worm gear has a longer service life.Ideal transmission effect and longer service life.


When installing the worm gear reducer, please pay special attention to the alignment of the transmission center of the drive shaft, and the alignment error should not be too large.At the same time, the reducer must be fixed.If the foundation is not firm, vibration and other phenomena will occur, which will cause unnecessary damage to the bearings and gears.


FEEDBACK

What are the common causes of failure of NGW102-6 planetary reducer bearing components?

What are the repair methods after the NGW81-25 planetary reducer bearing assembly fails?

How to judge whether there is a problem with the internal transmission pair of WP series reducer

What may be the causes of load fluctuations of WP series worm gear reducer?

Test the load before reducing the reducer Selection: on-site collection method of current, speed and load spectrum - Hangzhou Weigao Transmission