How to divide the gear accuracy grade of the gear reducer

Publish Time: 2021-11-30     Origin: WGT

The gear precision of the gear reducer has 12 levels, which are represented by numbers 1, 2, 3, ... 12, from high to low level of precision.The most commonly used is 5~9 level precision.In addition, according to the different requirements of motion precision, transmission stability and load distribution uniformity, the tolerances of each precision level are divided into three groups, I tolerance group, II tolerance group and III tolerance group.
The accuracy grade of the gear reducer should be determined according to the purpose of transmission, service conditions, transmission efficiency, peripheral speed and other economic and technical indicators.
Grade 5 gears are precision grades.
Machining method: model machining on precision gear machine tools with very small periodic errors.The surface of the teeth is precision ground, and the large gears are ground or rolled after suspension for precise rolling.The tooth surface roughness reaches 0.4-0.8.
Applications: precision gears for indexing mechanisms; gears with high speed and high requirements for running stability and noise; gears such as high-speed steam turbines, etc.
Grade 7 gears are a relatively high level of precision.
Processing method: model processing on high-precision gear machine tools.Non-hardened tooth surfaces are cut with high-precision tools; hardened gears require finishing (grinding, shaving, grinding, etc.).The tooth surface roughness reaches 1.6.
Applications: gears for high speed, load or reverse rotation; feed gears for machine tools need to move matching gears; medium reduction gears; aircraft gears; medium speed gears with herringbone teeth, etc.

FEEDBACK

How to check the bearing capacity of reducer gears: Calculation examples of contact stress and tooth root bending stress - Hangzhou Weigao Transmission

What methods can be used to avoid failure of the internal gear transmission system of CJY reducer?

What impact will a gear transmission system failure have on the CJY reducer?

Gearbox Market 2027: Retrofit Demand in Southeast Asian Palm Oil Mills

What specific failures will occur in the reducer if the transmission shaft and motor shaft are not concentric?