How to adjust the accuracy of the hard tooth reducer?

Publish Time: 2021-11-19     Origin: WGT

When we use hard tooth surface reducers, we have different requirements, according to the use requirements, whether it is accuracy, transmission stability or even load distribution.In the face of different use environments, the accuracy of the hard tooth surface reducer can also be adjusted.The following reducer manufacturers will enable you to understand the precise adjustment method of hard tooth surface reducer.
Adjusting the gap method: friction will occur during the movement of the hard tooth surface reducer, resulting in changes and wear in the size, shape and surface quality between the parts, thereby increasing the gap between the parts.At this point, we need to adjust it within a reasonable range to ensure the accuracy of the relative motion between the parts.
Error compensation method: when running through appropriate components, the errors of the components themselves are offset from each other to ensure the accuracy of the motion track of the hard tooth surface reducer.
The comprehensive compensation method uses hard tooth surface reducer mounted tools to process the correct work table to eliminate the combined results of various precision errors.
In our actual production and life, if the use environment changes, the equipment may not work properly.At this time, we can take the above measures to adjust the accuracy of the hard tooth reducer to meet the needs of industrial production.

FEEDBACK

What are the common causes of failure of NGW102-6 planetary reducer bearing components?

What are the repair methods after the NGW81-25 planetary reducer bearing assembly fails?

How to judge whether there is a problem with the internal transmission pair of WP series reducer

What may be the causes of load fluctuations of WP series worm gear reducer?

Test the load before reducing the reducer Selection: on-site collection method of current, speed and load spectrum - Hangzhou Weigao Transmission