Features of planetary cycloid pin reducer
Publish Time: 2021-09-08 Origin: Site
As shown in Figure 1, the cycloidal pin reducer is a relatively new transmission mechanism.Its unique stable structure can replace ordinary cylindrical gear reducer and worm gear reducer in many cases, because planetary cycloid reducer has high speed, high efficiency, compact structure, small size, stable operation, low noise, reliable use and long service life Long, reasonable design and convenient maintenance, easy to disassemble and install.
1. Large transmission ratio.The transmission ratio is 1/6-1/87 in the first reduction; when the two-stage reduction, the transmission ratio is 1/98-1/7569; the three-stage transmission, the transmission ratio is 1/5841 - 1 / 658503. In addition, multi-stage combinations can be used according to needs, and the speed ratio can reach the specified value.
2. High transmission efficiency.Because the meshing part adopts rolling meshing, the general main transmission efficiency is 90% - 95%.
3. Compact structure, small size and light weight.Compared with ordinary cylindrical gear reducer, the volume can be reduced by 1/2-2/3.
4. Few faults and long service life.The main transmission meshing parts are made of ground bearing steel so they have good mechanical properties and wear resistance.Because they are rolling friction, they have less breakdown and a longer life.
5. Stable and reliable operation.Since the transmission process is multi-tooth meshing, it makes the operation stable and reliable with low noise.
6. Easy to disassemble and maintain.
7. Strong overload capacity, impact resistance, small moment of inertia, suitable for frequent starting and positive and negative transmission.