Countermeasures and Opinions on Avoiding Pitting Corrosion of Gear Reducer

Abstract: In the gear repair and reinstallation process of the reducer, the repair technical regulations are strictly implemented to ensure that the gears of each part are in place, the impurities in each contact part are removed together, and the axial free space of the gear is zero.After adjustment, ensure the contact area of ​​the gear teeth.Contact accuracy of reducer gears.

(1) During the maintenance and reinstallation process of the reducer gear, strictly implement the maintenance technical regulations to ensure that the gears of each part are in place, the impurities in each contact part are removed together, the axial blanks are adjusted to the gears, and then the gear teeth are ensured the contact area.Contact accuracy of forward reducer gears.

(2) The lubricant of the reducer should be lubricated according to the type of lubricant required by the reducer itself, so as to prevent the mixing of different types of lubricants, ensure the quality of the lubricant, and prohibit the use of expired lubricants..K series gear reducer

(3) The gears of the reducer strictly follow the data selection.Materials with unqualified quality cannot be selected at will.Together with gears for heat treatment, unqualified gear products are resolutely selected.