Advantages and disadvantages of gear reducer and worm gear reducer
Publish Time: 2021-11-30 Origin: WGT
1. Transmission principle:
Gearing − It mainly depends on the tooth profile of the driving gear to drive the tooth profile of the driven gear.
Worm gear and worm transmission - mainly depends on the sliding friction on the tooth surface of the driving worm and the worm gear mesh, so as to generate relative motion on the tooth surface of the worm wheel to realize the transmission.
2. Advantages of gear transmission:
The reducer housing body can transmit motion and power between any shafts in space, that is, the shafts can be parallel, crossed or staggered; stable rotation, large transmission range, multi-stage gear transmission design, wide application range, long service life , high efficiency (90%~99%), the box body is mainly made of cast iron, with beautiful appearance and compact structure.Under normal circumstances, the working environment temperature is -10℃~40℃.Compared with similar products, this product has a wide speed range, compact structure and easy installation.It can be widely used in the deceleration mechanism of various mechanical equipment, such as metallurgy, mining, hoisting, light industry, chemical industry, transportation, construction, etc.
3. Disadvantages of gear transmission:
Gears, case processing equipment, gear grinding process and assembly technology are more stringent, resulting in high manufacturing costs.The gear transmission has no overload protection and self-locking performance.It needs to be additionally equipped with a braking device, relatively loud noise, single-stage gear transmission speed ratio (generally no more than 1:7), etc.Liquid lubricating oil must be added.
4. Advantages of worm drive:
The single-stage reducer can obtain a large transmission ratio (generally 5~100), has a compact structure, and can be used with lubricating oil or grease.The transmission is stable, the noise is small, and the large speed ratio can realize the self-locking performance.The connection of small single-stage + large single-stage reducer can increase the overall speed ratio and torque.The application range can be further improved, and the manufacturing cost is relatively low.
5. Disadvantages of worm drive:
Transmission meshing efficiency is relatively low, and the greater the speed ratio, the lower the efficiency.It can only be in the form of straight and vertical output, which has certain restrictions on the application, the complicated process of casting copper materials for the worm gear and the high cost of small batch production.
RV worm gear reducer
The helical gear reducer cannot be self-locking, that is, the drive variable drive and the active variable drive; although the worm gear reducer can be self-locking, it can only be worm drive and worm drive, which is irreversible.In addition, the former allows long-term operation, and the latter does not allow long-term operation.The former has high transmission efficiency and the latter has low transmission efficiency, which means that the former has low heating and the latter has high heating and requires more lubrication.