Advantages and choices of planetary reducer

Publish Time: 2021-11-30     Origin: WGT

We all know that the function of the reducer is mainly to reduce the speed and increase the torque.We can see the shadow of planetary reducers in various industries.It is so widely used.What are the advantages of planetary reducer?How should we choose?Let's see the editor!
Planetary reducer
1. Advantages of planetary reducer
Planetary reducer 20crmnti carburizing and quenching grinding wheel has small size, light weight, high bearing capacity, long service life, stable operation, low noise, large output torque, high efficiency, high efficiency, high efficiency, high efficiency, high efficiency , efficient, efficient, efficient, efficient, efficient, efficient, efficient, efficient, efficient, efficient, efficient, efficient, efficient, efficient, efficient, efficient, efficient High, efficient, efficient, efficient, efficient, efficient, efficient, efficient, efficient, efficient, efficient, efficient, efficient, efficient, efficient, efficient).It has the characteristics of current splitting and multi-tooth meshing.This is a new type of reducer with wide universality.The maximum input power can reach 104kW.It is suitable for the new planetary series WGN fixed shaft transmission reducer, WN child-parent gear transmission reducer and small tooth difference elastic uniform load reducer in industrial sectors, such as lifting and transportation, construction machinery, metallurgy, mining, petrochemical industry, Construction machinery, optical textile industry, medical equipment, instruments, automobiles, ships, weapons, aerospace, etc.
2. The planetary reducer has so many advantages, so how should we choose our choice?
1. Selection of speed ratio of planetary reducer:
The selection of planetary reducer should first determine the reduction rate.After determining the reduction rate, it is necessary to multiply the rated output torque of the product prototype by the rated torque of the selected servo motor, and the obtained value is less than the rated output torque of the product prototype.At the same time, the overload capacity of the driving motor and the actual required maximum working torque should also be considered.The required maximum operating torque is less than twice its rated output torque.
2. Dimensions and specifications of the planetary reducer Selection:
After the above conditions are met, the reducer with the smallest volume is selected, and the reducer with a smaller volume has a lower cost.If there is not enough space, a motor reducer can be used for a linear connection, or an angular reducer can be used to rotate the torque by 90 degrees.
3. Accuracy selection of planetary reducer (return to clear):
The next step is to consider the return stroke of the planetary reducer.The smaller the return gap, the higher the accuracy and the higher the cost.Users want to choose from a range of reducers that meet their accuracy requirements.
4. The service life of the planetary reducer:
Lateral/radial forces and average life should also be considered.Reducers with large transverse/radial stresses are installed reliably and are not prone to problems.Generally speaking, its average life is longer than that of the configured servo motor.
5. Other instructions for the planetary reducer:
After meeting the above requirements, select the required installation size, shaft diameter and input flange according to the product prototype to match the motor.You can also consider the weight of the motor.The reducer can only be used with a motor whose weight is less than a certain amount.If the motor is too heavy, long-term migration will damage the output flange of the reducer.

FEEDBACK

If the gear gap of the reducer is too large or too small, what efficiency problems will it cause?

How to adjust and repair the gear backlash of the reducer if it is too large or too small?

How to carry out dynamic inspection after FAF98-4KW-140-M4 gear reducer is installed

How to deal with abnormal vibration of WPDKS80-60 worm gear reducer under low load

What are the maintenance points for ZDY250-3.55-II hard tooth surface reducer in food plants?