Article List

• Difference between hard tooth surface reducer and soft tooth surface reducer

  In the process of gear transmission design, especially closed transmission, if the hardness of the gear is not fully considered in the design, it will have a great impact on the performance of the transmission system. Such as common gear failure: tooth surface pitting, tooth root fatigue fracture, e

  September 14, 2021
• The difference between hard tooth surface reducer and soft tooth surface reducer

  In the process of gear transmission design, especially closed transmission, if the hardness of the gear is not fully considered in the design, it will have a great impact on the performance of the transmission system.Such as common gear failure: tooth surface depression, tooth root fatigue fracture, e

  September 14, 2021
• Application range of hard gear reducer

  1. The speed of the high-speed shaft should not be greater than 1500 rpm; 2.The peripheral speed of gear transmission should not be greater than 20m/s; 3.The working environment temperature is -40°C - 45°C.If it is below 0°C, it will preheat above 0°C before starting

  September 13, 2021
• Application scope of hardened gear reducer

  1. The speed of high-speed shaft shall not be greater than 1500 rpm;2. The circumferential speed of gear transmission shall not be greater than 20m / S;3. The working ambient temperature is - 40 ℃ - 45 ℃. If it is lower than 0 ℃, the lubricating oil shall be preheated to above 0 ℃ before startup.Har

  September 13, 2021
• Characteristics of rotary reducer

  hollowed areas The rotary table of the hollow rotary platform is a hollow structure, and the servo motor is connected on the side to facilitate the installation of gas pipe and wire in the smelting tool.High repeat positioning accuracyThe hollow rotating platform adopts the single-stage helical gear

  September 13, 2021
• Features of rotary reducers

  The rotary table of the hollow rotary platform in the hollow area is a hollow structure, and the servo motor is connected to the side to facilitate the installation of gas pipes and lines in the smelting tool.Repeat positioning accuracy Hollow rotary platform adopts single-stage helical gear

  September 13, 2021
• Characteristics of hardened cylindrical gear reducer

  1) High bearing capacity. The gear is carburized, Quenched and ground, and the bearing capacity is greatly improved compared with the gear reducer with soft tooth surface and medium hard tooth surface of hardened and tempered hobbing.2) Small size and light weight. Compared with the reducer with sof

  September 13, 2021
• Properties of hardened cylindrical gear units

  1) High carrying capacity.The gears are carburized, quenched and ground, compared with the gear reducer, the bearing capacity is greatly improved, hardened and tempered rolling parts (soft tooth surface and medium hard tooth surface) small size and light weight.Compared with SOF's reducer

  September 13, 2021
• What is a pin wheel reducer

  A pin gear reducer is a device that decelerates the number of rotations of the motor to the required number of rotations and obtains a large torque.Reducers are relatively precise machines.It is used to reduce speed and increase torque.Pin gear reducer adopts cycloid wheel

  September 11, 2021
• What is the needle wheel reducer

  The needle wheel reducer is a device that decelerates the rotation number of the motor to the required rotation number and obtains a large torque. Reducer is a relatively precise machine. The purpose of using it is to reduce the speed and increase the torque. The pin gear reducer adopts the cycloid

  September 11, 2021