What is the noise level of GRF17-Y0.18-4P-28.32-M4 reducer?

GRF17-Y0.18-4P-28.32-M4 Reducer has relatively low noise during normal operation

Helical gears - Bevel gear reducers usually have the characteristics of smooth operation and low noise. 3 This is because when helical gears are driven, the gear teeth are gradually meshed and separated, with a large overlap, can withstand large loads, and the noise generated during the transmission is small. At the same time, bevel gears are used to achieve power transmission in the right angle direction. Under reasonable design and manufacturing, they can also ensure the smoothness of the transmission and reduce the generation of noise.

Generally speaking, if the reducer operates under normal working temperature with appropriate lubrication conditions for rated load and good installation and maintenance, its noise level can usually be controlled at around 65 - 80 decibels 15. However, this value is not absolute. The actual noise level may be affected by a variety of factors, such as the motor speed installation accuracy lubrication and the manufacturing accuracy of the reducer. For example, excessive load lubrication, poor motor speed, insufficient installation accuracy or low manufacturing accuracy of the reducer itself, etc., may cause the actual working noise of the reducer to increase.