What are the daily maintenance work of BL series BLY3-29-5.5KW cycloid pinwheel reducer

Check the oil level: Check the oil level in the reducer regularly to ensure that the oil level is within the normal range. Too low oil level will lead to poor lubrication and aggravation of gears and bearings; too high oil level may cause problems such as rising oil temperature and oil leakage.

Oil product inspection: Observe the color, texture and odor of the lubricant to determine whether the oil is spoiled, contaminated or mixed with impurities. If the oil is found to be abnormal, it should be replaced in time. At the same time, according to the requirements of the equipment instructions, oil samples are regularly sampled and tested to accurately grasp the performance indicators of the oil.

Temperature check: During the operation of the reducer, pay attention to its temperature changes. Generally speaking, the oil temperature of the reducer should not exceed the specified upper limit (usually 80 - 90℃). If the oil temperature is found to be too high, it may be caused by excessive load, poor heat dissipation, poor oil quality or abnormal internal friction, and the problem needs to be checked and solved in a timely manner.

Vibration and noise monitoring: The reducer in normal operation has less vibration and stable noise. If abnormal vibration or noise occurs, it may be caused by wear of gears, damaged bearings, loose anchor bolts, loose internal parts or poor meshing, etc., the machine should be stopped immediately to find out the cause and repair or replace the damaged parts.

Sealing inspection: Check all sealing parts of the reducer, such as end cap, oil seal, oil plug, etc. to ensure that there is no oil leakage. Once oil leakage is found, find out the cause in time, replace the damaged seal, and replenish lubricating oil.

Appearance inspection: Check the appearance of the reducer regularly, check whether the shell has cracks, damage or deformation, and whether the bolts at each connection are loose. If the bolts are loose, they should be tightened in time to prevent loose parts from affecting the normal operation of the reducer.

Cleaning and maintenance: Keep the surface of the reducer clean and remove dust, oil and debris in time to avoid affecting the heat dissipation effect. At the same time, clean the environment around the reducer to ensure good ventilation and avoid flammable, explosive or debris piled up near it.

Transmission component inspection: Check the input shaft and output shaft of the reducer to ensure that it rotates flexibly and has no stagnation. At the same time, check whether the connections of transmission components such as couplings, pulleys or sprockets are firm, whether there is any wear or damage. If there is any problem, it should be dealt with or replaced in time.

Recording and analysis: Establish a maintenance file of the reducer, record the time, content, problems found and processing results of each inspection and maintenance. Through the analysis of these records, potential problems of the reducer can be discovered in a timely manner, preventive measures can be taken in advance, and the service life of the reducer can be extended.