Sealing requirements of hardened gear reducer
Publish Time: 2021-10-09 Origin: WeiGao Transmission
Hard face gear reducer is a type of reducer mainly produced according to national standards. It is mainly used for the transmission device arranged in the vertical direction of the output shaft. In industrial production, hard tooth gear reducer is mainly used in belt conveyor and various transportation machinery, as well as in the transmission machinery of various general machinery such as coal, metallurgy, chemical industry, building materials, light industry and petroleum.
Sealing requirements and functions of hardened gear reducer:
1. No gasket is allowed to be filled between the split surfaces of the box body of the hard tooth surface reducer, but sealant or water glass can be coated to ensure sealing.
2. When assembling the reducer, before tightening the box bolts, use a 0.05mm feeler gauge to check the tightness between the hard tooth surface reducer case cover and the joint surface of the case base.
3. The shaft extension seal shall be coated with grease, and each seal of hard tooth reducer shall be assembled in strict accordance with the requirements. Only when the sealing of hard tooth surface reducer is done well can it ensure its smooth operation, prevent oil leakage of reducer, effectively improve the production efficiency of reducer and bring us more benefits.