Sealing requirements of hard tooth surface reducer

The hard tooth surface gear reducer is mainly a kind of reducer manufactured according to the national standard, and it is mainly used for the transmission device with the output shaft arranged in the vertical direction.In industrial production, hard tooth surface reducers are mainly used in belt conveyors and various transportation machinery, as well as transmission machinery for general machinery such as coal, metallurgy, chemical industry, building materials, light industry, and petroleum.

Sealing requirements and functions of hard tooth surface reducer:

1. No gaskets are allowed to be filled between the split surfaces of the hard tooth surface reducer box, but sealant or water glass can be used to ensure the seal.

2. When assembling the reducer, before tightening the bolts of the box body, use a 0.05mm feeler gauge to check the tightness of the joint surface of the hard tooth reducer box cover and the box body.

3. The shaft extension seal should be coated with grease, and the seals of the hard tooth surface reducer should be assembled strictly according to the requirements.Only by doing a good job of sealing the hard tooth surface reducer can it ensure its smooth operation, prevent the reducer from oil leakage, effectively improve the production efficiency of the reducer, and bring us more benefits.

If you have any questions or business needs about the reducer, you can consult us, and we will serve you wholeheartedly.