How long is the maintenance cycle of the P2KA18 planetary reducer

New reducer: When used for the first time, after a run-in period of 150-300 hours (7-14 days), new oil must be replaced. Replace the oil for a second time until 3 months.

Subsequent use: Planetary reducers that work continuously for a long time can change the oil once every 6-8 months; reducers that work for no more than 8 hours a day can change the oil once every 10-12 months. At the same time, the oil quality should be checked regularly. If the oil contains impurities, is contaminated, has been decomposed, aged and deteriorated, it should be replaced at any time.

Monthly or quarterly: Perform periodic maintenance and conduct detailed inspections on key components of the reducer, such as the wear of the gears, the status of the bearings, and the integrity of the seals, so as to promptly discover potential problems and repair or replace the components before causing more serious failures.

Yearly or every two years: Perform regular maintenance, including dismantling the reducer to check the condition of internal components, replacing aging seals and worn gears, and re-adjustment and testing of the entire system to ensure the long-term and stable operation of the reducer and extend service life.