How does the servomotor eliminate the gear reducer clearance?

Planetary reducer is a very common product in machinery and other fields. How can the servo motor eliminate the gap of reducer? Now, let's take a look.

1. Seal the felt in the penetrating cover. Before installation, soak it in the heated liquid lubricating grease for 1-2 hours before installation. The sealing effect is quite good.

2. Replace the transparent bearing cover of the servo reducer. On the newly made transparent cover of the bearing, 2~3 annular grooves are mainly processed and 6 oil return holes are drilled evenly. It should be noted that there is an oil return hole at the bottom (that is, the oil return hole is tangent to the annular groove), so that the oil return effect is good.

3. The ventilator of the servo reducer is the place where dust and oil are most easily combined. Usually, after a period of operation, the ventilator is blocked. Therefore, the key to solve the problem of "running, emitting and leaking" oil of the reducer is to enable the ventilator to ventilate normally. For this reason, the ventilator (reducer accessory) is changed into one mouth. 1. Seal the felt in the penetrating cover. Before installation, soak it in the heated liquid lubricating grease for 1~2h before installation. The sealing effect is quite good.