High-speed shaft rotation rates for hardened cylindrical reducers
Publish Time: 2021-11-19 Origin: WGT
China's industry is remembered by the world, and China's gear industry is the leader of the world's gear industry.The development goal of China's gear industry is determined as 'promoting China's gear manufacturing power and export power'.
In the process of progress, China's gear industry will reveal four major situations: The market will reveal a large number of new equipment products with international standards and independent intellectual property rights.It can be widely used in metallurgy, mining, chemical industry, building materials, hoisting, transportation, textile, paper, instrument, plastic, rubber, construction machinery, energy and other industrial sectors.
The high-speed shaft rotation of the hardened cylindrical gear reducer should not be greater than 1500rpm.The peripheral speed of the gear transmission should not be greater than 20m/s.The operating environment temperature is -40-45°C.If it is lower than 0°C, the lubricating oil should be preheated above 0°C to 0°C before starting.Reducers are available for operation in both positive and negative directions.
The lubricating oil should be replaced after the first use or the new replacement of the new replacement worm pair and 150-400 hours later, and the subsequent oil change cycle should be less than or equal to 4000 hours.Regularly check the quantity and quality of the oil, keep enough lubricating oil, and replace the oil mixed with impurities or deteriorate in time.The filling volume of oil should meet the requirements in the table.Do not mix oils of different brands.Mixing of oils of the same brand but different viscosities is allowed.Please refer to Attached Figure 1 for the oil level.The operating environment temperature of the reducer is - 40 ~ + 40 ℃, according to the attached picture 2. When the ambient temperature is lower than 0 ℃, the lubricating oil must be heated above 0 ℃, or the lubricating oil with low freezing point must be used before starting.