Function and working principle of gear reducer

Gear reducer is a power transmission mechanism with advanced structural design and gear speed converter.It has a wide range of applications, unique structure and stable performance.Common reducers are introduced below.
The main functions of the gear reducer are:
1) Deceleration also reduces the inertia of the load, which is the square of the reduction ratio.You can see that generic motors have inertia values.
2) Reduce the speed and increase the output torque at the same time.The torque output ratio should be multiplied by the reduced ratio motor output, but be careful not to exceed the rated torque of the reducer.
Working principle of gear reducer
Gear reducers are often used in transmission equipment with low speed and high torque.An electric motor, internal combustion engine, or other high-speed electrical power is meshed by a large gear on the output shaft, and a gear with fewer teeth on the input shaft of the gear reducer.Ordinary gear reducers also have several pairs of gears, which have the same principle and can achieve the ideal deceleration effect.The ratio of the number of teeth of the large and small gears is the transmission ratio.