Detailed introduction of the S series of helical worm gear reducers

Among modern industrial reducers, four series reducers occupy a considerable share.The four series of reducers adopt serialization and modular design ideas, have wide adaptability, have a large number of motor combinations, installation positions and structural forms, and the transmission ratio meets different working conditions and realizes electromechanical integration.I will introduce the S series reducers in the following four series.

1. S series reducers have high scientific and technical content.It has a transmission with integrated helical and worm gears to increase the torque and efficiency of the machine.This series of products has complete specifications, wide rotation speed range, good versatility, adaptable to various installation methods, safe and reliable performance, long service life and the requirements of implementing international standards.

2. The concave-convex surface of the fuselage has the functions of heat dissipation, strong vibration absorption, low temperature rise and low noise.

3. The machine has good sealing performance and strong adaptability to the working environment.

4. S series helical gears have high transmission accuracy and are especially suitable for working at frequent starts.It can be connected to various reducers and configured with various types of motor drives, and can be installed at 90 degrees for transmission operation

Place.

5. The key components of S helical gears are made of high wear materials and receive special heat treatment.They are characterized by high machining accuracy, stable gearbox, small volume, large bearing capacity and long service life.

6. The helical gear reducer can be equipped with various types of electric motors, thus forming an electromechanical integration, thereby fully ensuring the quality characteristics of the product.

Features:

1. Combine the helical gear and the worm gear into a compact structure and a large reduction ratio.

2. Installation method: foot installation, hollow shaft installation, flange installation, torque arm installation and small flange installation.

3. Input mode: motor direct connection, electric belt connection or input shaft, connection flange input.

4. Average efficiency: 77% reduction rate for 7.5-69.39; 62% for 70.43-288; 57% for S/R combination.

5. Combination with R series can get bigger speed ratio.

Technical Parameters:

Speed ​​ratio range: 9.96~244.74 for basic model, 8608 for S series/R series combination model

Torque range: 43~4200 nm

Power range: 0.18 ~ 22 kW

structure type:

S-axis extension connection SF-axis extension and flange mount

s ... s indicates shaft input shaft mounting connection

SAF shaft mount, flange mount